Advantages of spiral cutter head

With the development of science and technology, the abandoned spiral cutter head has gradually replaced the traditional flat cutter and four-sided planer, and in the near future, the abandoned spiral cutter head will gradually become popular in the woodworking machinery industry. As an innovative product of flat-blade knives and four-sided planers, the design cutter head of abandoned spiral has become the standard tool for woodworking machinery in Europe and America. Abandoned spiral cutter head distributes the planing points evenly to each processing blade more scientifically, and fine-tune the angle between the blade and the processing surface, which can be easily adjusted to adapt to the processing of different materials.

Advantages of discarding spiral cutter head:
(1) Spiral cutter face: the high-precision design and manufacturing technology will reasonably arrange the discarded blades around the cutter body to form a smaller cutting surface per unit time, so as to improve the burning mark and tenon of the blade.
(2) Fast heat dissipation: Some of the tool bodies are made of 7 series aerospace grade aluminum alloy, which not only improves the heat dissipation speed, but also improves the stability of the tool and the structural strength of the tool body, thus improving the service life of the tool body.
(3) Abandoned blade: The imported Luxemburg small blade is adopted without high temperature welding, which ensures that the original hardness of each blade is above HRA93.5 degrees and greatly improves the service life of the tool. When the blade is passivated, the factory operator disassembles the blade by himself, which is easy to operate and saves time.
(4) Longer service life: the service life of aluminum alloy cutter body is 1-2 times longer than that of ordinary flat-blade cutter, and 3-4 times longer if it is used on double-sided planer and four-sided planer.
(5) The sawdust is very small: the sawdust formed by cutting in a spiral way per unit time is very small, and it is easy to discharge the sawdust from the surface of the processed wood in the Chinese-English dust collection system.
(6) Low noise: the noise value generated when contacting the wood surface in unit time and when the flat knife contacts the wood surface in the same time is reduced by about 30 to 50 dB.

Abandoned helical cutter heads are divided into heavy cutting helical cutter heads and light cutting helical cutter heads. Heavy cutting spiral cutter head is mainly used for automatic profile milling and edge planer, vertical shaft machine, four-sided planer and cutting forming. The light cutting spiral cutter head is mainly used for vertical shaft machine, four-sided planer, etc., and the main cutting plane is smooth and round.